NEWAY LIGHTING CO.,LTD
Quality Indoor LED Manufacturer

         Tel:86-769-81620196   Email:sales@newaylighting.com

         
 newaylighting   
 newayledlights
  Homepage  »  Products  »  LED Tube  »  Motion Sensor LED Tube  »  Infrared Motion Sensor LED Tube  »  24w microwave sensor 5 ft linear fluorescent light fixtures, radar sensor 5' led t8 tube light bulbs

We are the most professional 24w microwave sensor 5 ft linear fluorescent light fixtures, radar sensor 5' led t8 tube light bulbs manufacturers and suppliers in China. 24w microwave sensor 5 ft linear fluorescent light fixtures, radar sensor 5' led t8 tube light bulbs is popular on the world markets such as export to Australia, New Zealand, Thailand, Indonesia, Malaysia, Philippines, Singapore, Vietnam, UAE, Sandi Arabia, South Africa, Poland, Sweden, Spain, Greece, Italy, Russia, Netherland, Danmark, Belgium, USA, Canada, Braizil, Maxico, UK countries etc.

Specifications
Model: NW-LED-TUBE-MIC-T8-24W-1500-W
Power: 24W
LED Type: SMD 2835
Lumen: 2150 ± 50Lm
Dimension: Ф26*1500mm
Voltage: AC85-265V
Induction Distance: 9m ~ 10m
Induction Angle: 360°
Lighting Time Delay: 35 seconds
Color Temperature: 2700k-7200k
Lamp Holder: T8, G13
Power Factor: PF≥0.9
Power Conversion Efficiency: ≥85%
Cover Material: Aluminum + PC Cover
Surface Color: milky, frosted, transparent
PCB Circuit Board Material: FR4 fiberglass circuit boards
Operating Temperature: -20℃~+40℃
Storage Temperature: -30℃~+50℃
Storage Humidity: 10%-90%RH
Warranty Period: 3 Years


Comparison Chart


…………………………………………………………………………………………………………………………………………………………………………………………

Dimension and Drawing


…………………………………………………………………………………………………………………………………………………………………………………………

How Microwave Motion Sensor Works, Microwave Sensor Working Principle
Microwave sensors, just like radar, launch wireless microwave will interfere with the microwave signal when the object moves into the range of LED lamp microwave sensors, the sensor detects a signal light, 30 seconds to leave or stationary when the object after when the micro-light standby. This lamp does not require a lens, sensing angle of 360 degrees, high sensitivity, reliability, widely used in all types of residential, summer, shopping malls, garage, underground parking lots, washing room, basement, corridors, warehouse, passageway, elevator, bus stop and other all-day or 24hours long time continuous lighting areas, a field of LED lighting and high-tech energy-saving applications in the field of automatic control, precision instruments, LED microwave sensors to run very stable, compare with the IR & PIR sensors are much more advanced.eg a piece of paper can be separated with the IR&PIR sensor, the microwave radar sensor sensing range, the wall thickness of less than 10 cm wall induction. In particular, full built-in, outside of what could not see, beautiful and beautiful and convenient.

1) Automatic Metering: according to ambient light and dark to select standby brightness sensor lights (full bright lights can be automatically sensing person or vehicle to the left of the people and vehicles in accordance with the set time to return to 10% in bright lighting because underground garage, a little micro-bright lighting, it will not appear gloomy terrible.) lit the lamp than the 100% power saving over 90%.

2) User-friendly design: easy installation, using more advanced object mobile microwave detection sensor technology, unlike the common voice, touch, buttons, etc., with high sensitivity, anti-interference, silent, fast response, the induction distance characteristics. Itself is not issued any type of radiation, the device power consumption is very small, non-contact, to the maximum to protect the health of people, away germs accidental infection.

3) Energy saving, long life: the ultra-low power consumption, long standby, super sensitivity: high brightness LED life of up to 50,000 hours, effectively put an end to the long open load, to achieve energy savings, extended load life purpose. Reasonable structure design, cleverly hidden fixed, look no screws.

4) Temperature compensation: a unique temperature compensation chip, to reduce the LED sensing distance is affected by temperature. (Note: The sensor will be subject to the interference of the external magnetic field: transmit a wireless signal devices such as mobile phones, computers, etc., may affect the induction Note that).

5) Sensing distance and lamp mounting height, linear induction distance of 8 meters to 10 meters, laboratory testing, installed in a two-meter-high place, the lamp for the center, around 2 to 2.5 m sensing range, installed in a 3-meter place to lamp as the center, were around before and after the sensing distance of 3-4 meters.


…………………………………………………………………………………………………………………………………………………………………………………………

Installation Instructions  


 

1. Must cut off the power before installation. First check what drive fluorescent tubes. Electronic drive mode or inductors (coils) drive way? If electronic drive, To power apart originally connected with the electronic ballast, lamp and electronic ballast cable need to cut. If Inductance ( coil ) ballasts drive, you do not change the other lines, just remove the fluorescent tube and starter.
2. Before Formal alternative replacement installation, Neway Lighting remind-The voltage range of related installation to be completely in line with the use of LED sensor lamp voltage, then turn off the power switch , rotary remove the traditional lamp, open bracket cover, remove the electronic ballast and starter set to be confirmed.
3. Mains AC input zero, the Firewire two tap two bases, and good insulation measures (wiring head position wrapped electrical insulation tape), attention to the need for electrician knowledge of the safe operation of the staff, such as the user does not have operational knowledge of electrical safety shall call a professional electrician check the wiring is correct, replace the bracket cover (locking screw).
4. Mounted the same specifications length LED sensor lamp on the bracket, close the total switching power supply, open the replacement lamp switch can be energized lit lighting use.
Warnings:
1. Products does not apply to sealed unit with dimming lamps
2. Avoid installation in high-temperature heat sources, superheated steam, corrosive gases, high-calorie, high- humidity environment place District
3. Installation and removal of products, must power off to avoid the risk of electric shock

…………………………………………………………………………………………………………………………………………………………………………………………

Packing Picture


…………………………………………………………………………………………………………………………………………………………………………………………

Application Picture
24w microwave sensor 5 ft linear fluorescent light fixtures, radar sensor 5' led t8 tube light bulbs application in overnment agencies building lighting project, the factory lighting engineering, school energy-saving lighting engineering, underground parking garage lighting, underground parking lighting engineering and expansion, the airport energy-saving lighting transformation, hotel lighting transformation, hospital lighting energy saving reconstruction, marketplace lighting engineering modification should be long hours every day or 24 hours lighting of large lighting energy saving place like area stairs, elevator swing, toilet, basement, hotel and office corridor corridor lamp, porch, warehouse, underground parking garage, underground aisle, subway lighting, become at present stage instead of long time work traditional induction fluorescent tube most ideal secondary energy-saving LED lighting products.