NEWAY LIGHTING CO.,LTD
Quality Indoor LED Manufacturer

         Tel:86-769-81620196   Email:sales@newaylighting.com

         
 newaylighting   
 newayledlights
  Homepage  »  Products  »  LED Bulb  »  Dimmable LED Bulbs  »  Dimmable LED Light Bulbs  »  dimmable remote controlled e27 6w led rgb light bulbs, 6 watt bright led e27 rgb bulb remote control

We are the most professional dimmable remote controlled e27 6w led rgb light bulbs, 6 watt bright led e27 rgb bulb remote control manufacturers and suppliers in China.

Technical Parameters
Model: NW-RGB-DIMM-LED-BULB-6W-KIT-04
1. Pir Touch Sensor Remote Controller,Iphone Controlled,Wifi Control,Apple,Ipad Steuern
2. LED Type: Epistar LED, SMD 5630
3. LED Qty: R 5 LED, G 5 LED, B 5 LED
4. Power Consumption: 6W
5. Luminous Flux: R 50Lm, G 100Lm, B 15Lm
6. CRI: ≥75Ra
7. Wavelength Of Light Source: R 625-630nm, G 520-525nm, B 447-452nm
8. Radio Frequency: 2400-2483.5MHz(2.4GHz Grobal)
9. Input Voltage: Bulb AC 85-265V(50/60Hz), RC 1.5V*2 AAA battery
10. Power Factor: PF>0.65
11. Lamp Holder: E26,E27 screw,B22 bayonet
12. Remote Control Distance: 25-30 Meters
13. Colour Changing Types: 640000
14. Modulation Mode: GFSK
15. Radiated Power: 6db
16. Beam Angle: 180°
17. Cover Material: Bulb-Aluminum+PC Milky, Remote Controller-ABS
18. Surface Appearance: Bulb-Silver, Remote Controller-White
19. Bulb Sizes: A60*(L)123MM
20. Remote Controller Sizes: (L)110*(W)52*(H)20MM
21. Operating Temperature: -20 to 45 degree centigrade
22. Storage Temperature: -30 to 60 degree centigrade
24. Storage Humidity: 10%-90%RH
25. Lifespan: ≥35000 Hours
26. Warranty Period: 2 Years
27. Certificates: CE, RoHS
28. Net Weight: 0.22KGS
29. Package Sizes: (L)97*(W)66*(H)130mm


Dynamic Demo

…………………………………………………………………………………………………………………………………………………………………………………………

Static Pictures

…………………………………………………………………………………………………………………………………………………………………………………………

Packing

…………………………………………………………………………………………………………………………………………………………………………………………

Remote Controller Keyboard
Programming(code clearing and code matching )
Code matching:
For a new kit ( remote& bulb), the remote can work only when it is programmed to the bulb.
Please follow the below instructions:
1. Confirm correct connection between the bulb and the power.
2. Switch off the power, then switch on again, and press key 5 once (within 3 seconds)
the moment you see the light is on.The LED bulb blinks twice slowly when it is done.
Code clearing:
The code can be cleared as needed.
The kit (remote and bulb) will stay in the original state after code clearing.
It can work when code rematching is done.
Please follow the below instructions:
1. Also, confirm correct connection between the bulb and the power.
2. Switch off the power, then switch on again, and long press key 5(within 3 seconds)
the moment you see the light is on.The LED bulb blinks nine times swiftly when it is done.

…………………………………………………………………………………………………………………………………………………………………………………………

Auto Demo List

…………………………………………………………………………………………………………………………………………………………………………………………

Light Distribusion Curve And Illumination Pictures
Attention
1.Please check whether the input voltage and lamp base is in accordance with the product.
2.Please don't connect wires with power on.
Please switch on again only when it is in right connection and no short circuit.
3.Please keep your finger off the touch ring when installing the batteries, to improve its sensitivity, and use the remote ( 3 seconds later) after the batteries are install LED.
Please reinstall the batteries, if the touch ring is found lowsensitivity.
4.Please do not put the bulb in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.
5.If the red indicating light keeps being on, it indicates the power is not enough, please change the batteries

…………………………………………………………………………………………………………………………………………………………………………………………

Applications